Re-purpose a Nifty Notion
If you own a cover stitch machine, you may be aware that it can do some amazing things. One of the things it can do is to make 3/4″ (18 mm) strapping for bathing suits, sundresses etc. A smaller version in a 3/8″ (9 mm) width is great for belt loops. To do that you need a fabric folder. if you don’t have a fabric folder, I will show you how to re-purpose a nifty notion you likely already have!
A fabric folder, as the name suggests, folds fabric to the back side as it travels through the opening. It is positioned right in front of the presser foot so as soon as it comes out of the folder, the folded fabric edges can be stitched down.
The folder fastens to the bed of the machine in the holes conveniently provided by the machine company, such as shown here.
Here is is fastened down. You you push the fabric strips in the wide part of the folder and like magic, out of the small end appears miles of folded fabric, ready to use. Well….not always. There can be issues…<sigh>
- Not all home Cover stitch machines have those convenient screw holes in the bed. My BabyLock does but not many other domestic machines do.
- The plate that fastens the folder to the machine, doesn’t always line up with the holes. You can see I could use only one screw to hold down the plate, which could cause it to rotate when in use.
- Folders are expensive and if you have to buy an adapter plate, that’s often extra
- You can’t always buy them in the sizes you want, and you may have to order them in.
What can you do? You can re-purpose something from your sewing room! In fact, almost every sewist has these nifty bias tape makers hiding in a drawer somewhere. They are available in several sizes and by several manufacturers. Shown here from L-R are Newey 1″ (25 mm), Clover 3/4″ (18 mm), Clover 1/2″ (12 mm), Dritz 1/2″ (12 mm) and Clover 1/4″ (6 mm). You can tell I like the Clover ones the best, although to be fair, most of these are over 20 years old and they still work fine! How do we re-purpose a nifty notion like this?
I’ve kept you in suspense long enough! We will tape the bias tape maker to the machine! I used green painter’s tape but almost any tape that will remove cleanly would do. I would think that duct tape or packing tape would leave a gummy residue on the machine bed. Not. Good.
But let me tell you more about the folders first! Here’s the back side of these folders. You can see (hopefully) that except for the little one on the right, they all have a groove or an opening so you can pull the fabric through easily. They all have a little finger pull loop. It’s great when you are making bias tape, but on the cover stitch machine, we won’t need to use that.
All these folders are the same in that you need to cut a strip of fabric twice as wide as the finished width. I am using a 3/4″ (18 mm) folder so my strips are cut to 1 1/2″ (36 mm). You may need to adjust the width slightly if you are using a thicker fabric. No need to cut spandex swimsuit fabric on the bias either – there’s enough stretch without it. Just cut it from selvedge to selvedge. It is also helpful (necessary really) to cut the fabric on an angle. It makes it much easier to feed through the tool.
Use the Left and Right needles on your cover stitch machine. All cover stitch machines have three needle positions. Using two needles side by side (i.e. Left and Middle or Middle and Right) will make your bottom stitch too narrow and it may not catch both raw edges of the fabric.
So now you know how to re-purpose a nifty notion! When you get to the end of the fabric, you will want to lock off the stitching so it does not unravel. I’ll show you that trick in the next post right after this one! Stay tuned!