Inside Men’s Underwear

We’re going inside men’s underwear to have a look at the inner support we have built into the Men’s Underwear pattern from Pin-up Girls. Along the way, we’ll go through the construction steps one-by-one. It is easier than you think to make the man in your life comfortable, supportive underwear. Supportive, you say? Yes, each view in the pattern has an optional sling inside. This sling keeps the body parts separated to prevent rubbing and chafing. Our customers tell us it is this feature that elevates our pattern from the others on the market.

Layout and Cutting

Choose which style you want – either the European style Lillebror or the traditional look of Michael.  In our example today, we’re sewing Michael. Trace your pattern carefully. There are 4 pieces to each pattern. If you do not want the sling, please cut two of the front panel and none of the sling. Baste the two layers of the front panel together and treat as one during the construction, ignoring the sling.

Check the fabric before laying out for cutting. Check which direction has the greatest amount of stretch. We call the Direction Of Greatest Stretch by its acronym, DoGS. Mark the direction with a wash-out marker on the fabric. The DoGS of the fabric should run around the body for ease of movement.  Here is the layout IF the fabric has the DoGS running across from selvedge to selvedge. Cut the back on the fold of the fabric.

inside-mens-underwear-fabric-layout-dogs-across

However, the fabric I chose actually has the DoGS running up and down along the selvedge. Therefore, we need to arrange our fabric a bit. Don’t worry – they will all fit!

img_5947

The Sling Inside Men’s Underwear

Serge the inside edges of the sling (if using) as shown in the drawing. (Sorry, I forgot to take the picture of just the serged edges!) If you do not have a serger, you can zig-zag the edge of the sling or overcast the edge.

 

Inside Men's Underwear sling serged

Pin and stitch the sling to the front section, matching notches M-1 and M-2. Stitch all around as shown, but do not serge the seam yet. Since the fabric is sheer, you can see the serged edges through the panel.

inside-mens-underwear-sling-outside

Pin and stitch the side front piece to the front/sling unit, matching the notches M-1 and M-2 You now have three layers sewn together along the curved seam. Now you can serge this seam. That’s how easy it is to add the support piece inside men’s underwear!

inside mens underwear m-side-front-sewn-to-front

inside-mens-underwear-sling-sewn-2

Putting the Underwear together

It’s easy to finish the sewing! Sew and serge the curved seam at the back, matching notches M-3 and M-4 on the back piece with M-3 and M-4 on the side front piece.

inside mens underwear m-back-seam-sewn

inside-mens-underwear-back-seams

Next, stitch and serge the inseam from one hem edge to the other, matching the notch on the back to the seamline of the front panel.

inside-mens-underwear-back

Legs and Waist

We hemmed the legs by turning up the bottom edge 3/4” (18 mm) and stitched with a small  zig-zag stitch. However, you could also use a three-step zig-zag, a cover stitch (done with a cover stitch machine, not a serger) or stitched with a twin needle (size 2.5/75 Stretch twin)

 

For the waistband, cut a piece of wide waist elastic 4” (10 cm) smaller than the actual waist measurement). Sew the ends of the elastic together with a straight stitch. Open the seam and zig-zag across to keep the ends from fraying.

inside mens underwear elastic

Fold the men’s underwear to mark the CF and the centre back and mark it with pins. Fold from the CF to the CB in half and pin again. Each pin represents one-quarter of the waist measurement. Quarter the elastic for the waist in the same manner and pin the elastic to the outside of the underwear fabric at each pin, overlapping the elastic over the fabric by 1/4” (6 mm).  Use a three-step zig-zag stitch to sew the elastic to the right side of the fabric stretching the elastic slightly as you sew to keep the fabric flat.

inside mens underwear elastic-sewn-on

Here’s the finished underwear. We made them sheer so you could see what’s going on inside.The sling supports the scrotum. men tell us they love the support factor, especially when running.

img_6182

Of course, you don’t have to make the men’s underwear out of sheer fabric! Here’s a pair made of a fun (admittedly garish!) print. Wouldn’t the man in your life love a pair of these flashy party pants? lol

img_6184

We hope you have enjoyed this peek inside Men’s Underwear. As always, your comments are welcome and appreciated.

Beverly

9 replies
  1. Joan Weaver
    Joan Weaver says:

    I feel like I’m late to the party…but finished my first pair of Michael underwear yesterday & am proud to say my husband (a committed white brief guy) is sporting his new fashion statement today. With just a waist measurement, this pattern was easy to sew, fits perfectly, & looks terrific.

    Reply
  2. Jennifer Moriarty
    Jennifer Moriarty says:

    I’m making the Lillebror as a swimsuit. Should I line the front panel, line the whole thing, or use no lining at all. If I line the whole thing, would the sling also get doubled? The swim fabric is a print with 80% Nylon 20% Spandex 4 way stretch. I don’t have any swim lining but I do have another plain swim fabric with the same characteristics I could use as a lining.

    Reply
    • Beverly Johnson
      Beverly Johnson says:

      I would line the front panel but not the sling. And I would use something solid colour as opposed to a print for the lining and the sling. I applaud your use of this pattern for a swimsuit. Please share photos of it on our Facebook page or Instagram page!

      Reply
    • Beverly V. Johnson
      Beverly V. Johnson says:

      The sheer is called matte glissonette, but we only used that so you could see the sling inside. For real life, the men seem to love the Bamboo, or Venice for really lightweight underwear, or the Active Cotton, Cotton Spandex for the colder months

      Reply
  3. Michelle
    Michelle says:

    My DS2 only wants the big bucks brand name one from now on. I’m making him a pair for Christmas for a comparison. Hmm, I might have to make my hubby a pair too.

    Reply
  4. Sewniptuck
    Sewniptuck says:

    Well thank you for the sneak peek inside men’s undies Beverly!! I can see these would be very comfortable for the man in my life – I’d never thought much about ‘support’ before, but consider myself fully informed now!!

    Reply

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *