Diamond Foam-lined Bustier

$25.00

Diamond Foam Lined Bustier Pattern

The Diamond Foam Lined Bustier Pattern is an offset vertically seamed cup with foam lining. This bra can be made with or without straps. Over 100 sizes from BCD 3.0 to BCD 6.0

SKU#PB-1026

Description

Diamond Foam Lined Bustier Pattern

The Diamond foam-lined bustier pattern will become a staple in your “fancy dress” wardrobe. This pattern with two views features an off-set vertical seamed cup for the roundest styling, and a shortened upper cup for maximum lift. We’ve included a strapless version as well as a view with straps. The to-the-waist length will hold you high at any evening, cocktail or wedding event. Our testers were amazed at the push-up look this pattern gives. The Diamond Bustier has been specially designed to use with foam lining, therefore enabling you to use virtually any stretch fabric over it as a cup cover. The Diamond Bustier is a sister to the other bras in the Jewel Collection: namely, Ruby, Sapphire and Amethyst.

The sizing for the Diamond Bustier is a bit different from other bra patterns, in that we use the Bottom Cup Depth (BCD) to determine the size of the cup. This is the measurement from the wire line at the base of the cup up to the location of the apex. It is much more accurate than relying on Ready-to-wear bra sizing, which can differ from company to company. Determine your BCD by measuring your best fitting bra between these two points. All cup sizes from 3.0 to 6.0 are included in the pattern. Combine these 13 cup depths with 1 of 8 band sizes from 26″ (65 cm) through 40″ (100 cm) to make the Diamond Foam Lined Bustier size range equivalent to over 100 unique bra sizes.

Required Materials for the Diamond Bustier:

0.3 m of Cut & Sew Foam Lining
0.5 m of stretchy fabric to cover the cups
0.5 m of stable fabric such as Duoplex or Sheer Cup Lining for the frame
0.3 metres of Power Net for the back band
0.7 m or less of 3/8″ finished width Fold-over Binding
1.1 m or less of 1.5″ Plush-Back Waistband Elastic for bottom band
1.2 metres of ⅜” Plush Back/Band Elastic for top band
0.5 metres of 3/8″ wide strip of stabilizer for the neckline
1.2 m (1.25 yd) or less of boning and casing
1 set of underwires sized according to the chart below
1 bow embellishment for the front
1 metre of Underwire Casing
1 Hook & Eye Tape closure that is 0.1 metre (which is 5 hooks and eyes tall) or a 5×3 Hook and Eye
1 Bow Embellishment for the front (optional)
1 set of Underwires according to the chart below

For Optional Straps View B 

1.0 – 1.2 m of Strap Elastic 1/2″-5/8″ wide for BCD sizes 3.0-4.5 and 5/8 – 3/4″ wide for sizes 4.75 to 6.0
1.0-1.2 m of double face satin ribbon,  1/2″ to 3/4″ to use as a stabilizer under the front part of the strap elastic
2 sliders and 4 rings width to match the strap elastic, either 1/2 to 3/4″ wide

 

Bottom Cup DepthUsually Fits North American Bra SizesAccepts Wire Sizes
3.0″ (7.5 cm)36A, 34B, 32 CWR-34, WL-32
3.25″ (8.1 cm)38A, 36B, 34CWR-36, WL-34
3.5″ (8.8 cm)40A, 38B, 36C, 32DWR-38, WL-36
3.75″ (9.4 cm)40B, 38C, 34D, 30EWR-40, WL-38, WX-36
4.0″ (10 cm)42B, 40C, 36D, 32EWR-42, WL-40, WX-38
4.25″ (10.6 cm)44B, 42C, 38D, 34E, 30FWR-44, WL-42, WX-40
4.5″ (11.2 cm)44C, 40D, 36E, 32FWR-44, WL-42, WX-40
4.75″ (11.9 cm)42D, 38E, 34F, 30GWR-46, WL-44, WX-42
5.0″ (12.5 cm)44D, 40E, 36F, 32GWR-46, WL-44, WX-42
5.25″ (13.3 cm)42E, 38F, 34G, 30HWR-48, WL-46, WX-44
5.5″ (13.8 cm)44E, 40F, 36G, 32HWR-48, WL-46, WX-44
5.75″ (14.4 cm)42F, 38G, 34HWR-50, WL-48, WX-46
6.0″ (15 cm)44F, 40G, 36HWR-50, WL-48, WX-46

WR – Regular Underwires
WL – Long Underwires
WX – Extra Long Underwires

 

Additional information

Weight.5 lbs
Dimensions12 × 9 × .2 in

Reviews

There are no reviews yet.

Be the first to review “Diamond Foam-lined Bustier”

Your email address will not be published. Required fields are marked *

You may also like…